Configuration Guide 629
Configuring Network Security
AAA Configuration
Console default default
Telnet default default
Ssh Login1 Enable1
Http default default
Switch(config-line)#end
Switch#copy running-config startup-config
HTTP
Follow these steps to apply the Login and Enable method lists for the application HTTP:
Step 1
configure
Enter global configuration mode.
Step 2
ip http login authentication {
method-lis
t
}
Apply the Login method list for the application HTTP.
method-list
:
Specify the name of the Login method list.
Step 3
ip http enable authentication {
method-lis
t
}
Apply the Enable method list for the application HTTP.
method-list
:
Specify the name of the Enable method list.
Step 4
show aaa global
Verify the configuration of application list.
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to apply the existing Login method list named Login1
and Enable method list named Enable1 for the application HTTP:
Switch#configure
Switch(config)#ip http login authentication
Login1
Switch(config)#ip http enable authentication
Enable1
Switch(config)#show aaa global
......
Module Login List Enable List
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
