Configuring Layer 2 Multicast
Configuring MLD Snooping
Configuration Guide
390
Switch(config)#show ipv6 mld snooping vlan 3
Vlan Id: 3
Router Time:500
Member Time:400
Static Router Port:None
Dynamic Router Port:None
Forbidden Router Port:None
Switch(config)#end
Switch#copy running-config startup-config
Configuring Static Router Port
Step 1
configure
Enter global configuration mode.
Step 2
ipv6 mld snooping vlan-config
vlan-id-list
[rport interface {gigabitEthernet
port-list
| port-
channel
port-channel-id
}]
port-list
and
port-channel-id
are the static router ports in the specified VLAN.
Step 3
show ipv6 mld snooping vlan
vlan-id
Show the basic MLD snooping configuration in the specified VLAN.
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable MLD Snooping in VLAN 2 and configure port
1/0/2 as the static router port:
Switch#configure
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping vlan-config
2
rport interface gigabitEthernet
1/0/2
Switch(config)#show ipv6 mld snooping vlan
2
Vlan Id: 2
Router Time:0
Member Time:0
Static Router Port:Gi1/0/2
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
