Configuring QoS
DiffServ Configuration
Configuration Guide
451
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to map CoS2 to TC0, and keep other CoS-id-TC as
default:
Switch#configure
Switch(config)#qos queue cos-map
2 0
Switch(config)#show qos status
802.1p priority is enabled.
DSCP priority is disabled.
Switch(config)#show qos cos-map
-----+-----+-----+-----+-----+-----+-----+----+----
Tag |0 |1 |2 |3 |4 |5 |6 |7
-----+-----+-----+-----+-----+-----+-----+----+----
TC |TC1 |TC0 |TC0 |TC3 |TC4 |TC5 |TC6 |TC7
-----+-----+-----+-----+-----+-----+-----+----+----
Switch(config)#end
Switch#copy running-config startup-config
Configuring DSCP Priority
Step 1
configure
Enter global configuration mode.
Step 2
qos dscp
Enable DSCP Priority.
Step 3
qos queue dscp-map {
dscp-list
} {
tc-id
}
Configure the mapping relations between the DSCP values in the IP header and the TC queues.
dscp-list:
Enter one or more DSCP values which range from 0 to 63. Enter the multiple values in
the format of "1-3,5,7".
tc-id:
Specify the TC-ID. The valid values are from 0 to 7.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
