Configuration Guide 606
Configuring Network Security
802.1X Configuration
Step 5
dot1x quiet-period
[time]
(Optional) Enable the quiet feature for 802.1X authentication and configure the quiet period.
time:
Set a value between 1 and 999 seconds for the quiet period. It is 10 seconds by
default. The quiet period starts after the authentication fails. During the quiet period, the
switch does not process authentication requests from the same client.
Step 6
dot1x timeout supplicant-timeout
time
Configure the supplicant timeout period.
time
:
Specify the maximum time for which the switch waits for response from the client. It
ranges from 1 to 9 seconds and the default time is 3 seconds. If the switch does not receive
any reply from the client within the specified time, it will resend the request.
Step 7
dot1x max-reauth-req
times
Specify the maximum number of attempts to send the authentication packet for the client.
times:
The maximum attempts for the client to send the authentication packet. It ranges
from 1 to 9 and the default is 3.
Step 8
show dot1x global
(Optional) Verify global configurations of 802.1X.
Step 9
end
Return to privileged EXEC mode.
Step 10
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable 802.1X authentication, configure PAP as the
authentication method and keep other parameters as default:
Switch#configure
Switch(config)#dot1x system-auth-control
Switch(config)#dot1x auth-method
pap
Switch(config)#show dot1x global
802.1X State: Enabled
Authentication Method: PAP
Handshake State: Enabled
Guest VLAN State: Disable
Guest VLAN ID: N/A
802.1X Accounting State: Disable
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
