Configuration Guide 621
Configuring Network Security
AAA Configuration
Step 3
show radius-server
Verify the configuration of RADIUS server.
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to add a RADIUS server on the switch. Set the IP address
of the server as 192.168.0.10, the authentication port as 1812, the shared key as 123456,
the timeout as 8 seconds and the retransmit number as 3.
Switch#configure
Switch(config)#radius-server host
192.168.0.10
auth-port
1812
timeout
8
retransmit
3
key
123456
Switch(config)#show radius-server
Server Ip Auth Port Acct Port Timeout Retransmit Shared key
192.168.0.10 1812 1813 8 3 123456
Switch(config)#end
Switch#copy running-config startup-config
Adding Server
Follow these steps to add server on the switch:
Step 1
configure
Enter global configuration mode.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
