Configuring DHCP VLAN Relay
DHCP VLAN Relay Configuration
Configuration Guide
439
2.2.2 (Optional) Configuring Option 82
Follow these steps to configure Option 82:
Step 1
configure
Enter global configuration mode.
Step 2
ip dhcp relay information
Enable the Option 82 feature.
Step 3
ip dhcp relay information policy
{ keep | replace | drop }
Configure how to process Option 82 information.
keep:
The switch will keep the Option 82 information in the packet.
replace:
The switch will replace the Option 82 information with the customized
configurations on the switch.
drop:
The switch will drop the packets carrying Option 82 information
Step 4
ip dhcp relay information custom
Enable the Customization feature of Option 82.
Step 5
ip dhcp relay information circuit-id
circuit-id
If the Customization feature is enabled, specify the circuit ID.
circuit-id:
Specify the circuit ID with 1 to 63 characters including digits, English letters and
underlines.
Step 6
ip dhcp relay information remote-id
remote-id
If the Customization feature is enabled, specify the remote ID.
remote-id:
Specify the remote ID with 1 to 32 characters including digits, English letters and
underlines.
Step 7
show ip dhcp relay
Verify the configuration of DHCP Relay.
Step 8
end
Return to Privileged EXEC Mode.
Step 9
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable Option 82 and configure the process of Option
82 information as keep:
Switch#configure
Switch(config)#ip dhcp relay information
Switch(config)#ip dhcp relay information policy
keep
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
