Configuration Guide
34
Managing System
System Info Configurations
smonth
: Enter the start month of Daylight Saving Time. There are 12 values showing as follows:
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
sday
: Enter the start day of Daylight Saving Time, which ranges from 1 to 31.
stime
: Enter the start time of Daylight Saving Time,in the format of HH:MM.
syear
: Enter the start year of Daylight Saving Time.
emonth
: Enter the end month of Daylight Saving Time. There are 12 values showing as follows:
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
eday
: Enter the end day of Daylight Saving Time, which ranges from 1 to 31.
etime
: Enter the end time of Daylight Saving Time,in the format of HH:MM.
eyear
: Enter the end year of Daylight Saving Time.
offset
: Enter the offset of Daylight Saving Time. The default value is 60.
Step 3
show system-time dst
Verify the DST information of the switch.
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the Daylight Saving Time by Date Mode. Set the
start time as 01:00 August 1st, 2016, set the end time as 01:00 September 1st,2016 and
set the offset as 50.
Switch#configure
Switch(config)#system-time dst date
Aug 1 01:00 2016 Sep 1 01:00 2016 50
Switch(config)#show system-time dst
DST starts at 01:00:00 on Aug 1 2016
DST ends at 01:00:00 on Sep 1 2016
DST offset is 50 minutes
DST configuration is one-off
Switch(config)#end
Switch#copy running-config startup-config
2.2.5 Specifying the Serial Port Parameter
Follow These steps to specify the serial port parameter.
Step 1
configure
Enter global configuration mode.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
