Configuration Guide
98
Managing Physical Interfaces
Configuration Examples
7.2.2 Configuration Scheme
You can configure port isolation to implement the requirement. Set 1/0/4 as the only
forwarding port for port 1/0/1, thus forbidding Host A to forward packets to the other
hosts.
The following sections provide configuration procedure in two ways: using the GUI and
using the CLI.
7.2.3 Using the GUI
1) Choose the menu
Switching > Port > Port Isolation
to load the following page. It
displays the port isolation list.
Figure 7-6
Port Isolation List
2) Click
Edit
on the above page to load the following page. Select port 1/0/1 as the
isolated port, and select port 1/0/4 as the forwarding port. Click
Apply
.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
