Configuration Guide
182
Configuring 802.1Q VLAN
802.1Q VLAN Configuration
2.2 Using the CLI
2.2.1 Creating a VLAN
Follow these steps to create a VLAN:
Step 1
configure
Enter global configuration mode.
Step 2
vlan
vlan-list
When you enter a new VLAN ID, the switch creates a new VLAN and enters VLAN
configuration mode; when you enter an existing VLAN ID, the switch directly enters VLAN
configuration mode.
vlan-list
: Specify the ID or the ID list of the VLAN(s) for configuration. The valid values are
from 2 to 4094, for example, 2-3,5.
Step 3
name
descript
(Optional) Specify a VLAN description for identification.
descript
: The length of the description should be 1 to 16 characters.
Step 4
show vlan
[ id
vlan-list
]
Show the global information of the specified VLAN(s). When no VLAN is specified, this
command shows global information of all 802.1Q VLANs.
vlan-list
: Specify the ID or the ID list of the VLAN(s) to show information. The valid values are
from 1 to 4094.
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create VLAN 2 and name it as RD :
Switch#configure
Switch(config)#vlan
2
Switch(config-vlan)#name
RD
Switch(config-vlan)#show vlan id
2
VLAN Name Status Ports
------- -------- --------- ---------
2 RD active
Switch(config-vlan)#end
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
