Toyota Corolla 2008 Owner'S Manual Download Page 292

Page: 292 / 310

’08 Corolla_U (L/O 0706)

170

2008 COROLLA from Aug. ’07 Prod. (OM12B28U)

To open the glove box door, pull the
lever.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box door
closed while driving.

Type A

Type B

Type C

To use the box, pull on the handle.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the auxiliary box
closed while driving.

Do not use the auxiliary box as an
ashtray.

Glove box

Auxiliary boxes

Summary of Contents for Corolla 2008























































































































































































































































































































Search results

Summary of Contents for Corolla 2008

Reviews:

Related manuals for Corolla 2008

Brands by name

Popular brands

Toyota Corolla 2008, Owner'S Manual

Search results

Summary of Contents for Corolla 2008

Reviews:

Related manuals for Corolla 2008

Brands by name

Popular brands