Toyota Corolla 2008 Owner'S Manual Download Page 14

Page: 14 / 310

’08 Corolla_U (L/O 0706)

188

2008 COROLLA from Aug. ’07 Prod. (OM12B28U)

This illustration indicates typical tire
symbols.

1. Tire size—For details, see “—Tire

size” on page 192.

2. DOT and Tire Identification

Number (TIN)—For details, see
“—DOT and Tire Identification
Number (TIN)” on page 191.

3. Uniform tire quality grading—

For details, see “Uniform tire quali-
ty grading” that follows.

4. The location of the tread wear

indicators—For details, see
“Checking and replacing tires” on
page 269.

5. Tire ply composition and mate-

rials—Plies mean a layer of rub-
ber−coated parallel cords. Cords
mean the strands forming the plies
in the tire.

6. Radial tire or bias−ply tires—A

radial tire has “RADIAL” on the
sidewall. The tire not marked with
“RADIAL” is a bias−ply tire.

Tire information—
—Tire symbols (standard tire)

Summary of Contents for Corolla 2008























































































































































































































































































































Search results

Summary of Contents for Corolla 2008

Reviews:

Related manuals for Corolla 2008

Brands by name

Popular brands

Toyota Corolla 2008, Owner'S Manual

Search results

Summary of Contents for Corolla 2008

Reviews:

Related manuals for Corolla 2008

Brands by name

Popular brands