Toyota Corolla 2008 Owner'S Manual Download Page 123 | Manualshive

Page: 123 / 310

background image

’08 Corolla_U (L/O 0706)

35

2008 COROLLA from Aug. ’07 Prod. (OM12B28U)

Front passenger seat

CAUTION

The SRS front passenger airbag also
deploys with considerable force, and
can cause death or serious injury es-
pecially if the front passenger is very
close to the airbag. The front passen-
ger seat should be as far from the
airbag as possible with the seatback
adjusted, so the front passenger sits
upright.

Front seats (with SRS side airbags)

CAUTION

The SRS side airbags are installed in
the driver and front passenger seats.
Observe the following precautions.

Do not lean against the front door
when the vehicle is in use, since
the side airbag inflates with consid-
erable speed and force. Otherwise,
you may be killed or seriously in-
jured.

Do not use seat accessories which
cover the area where the side air-
bags inflate. Such accessories may
prevent the side airbags from acti-
vating correctly, causing death or
serious injury.

Do not modify or replace the seats
or upholstery of the seats with side
airbags. Such change may prevent
the side airbag system from activat-
ing correctly, disable the system or
cause the side airbags to inflate ac-
cidentally, resulting in death or seri-
ous injury.

CAUTION

Do not adjust the seat while the
vehicle is moving as the seat may
unexpectedly move and cause the
driver to lose control of the vehicle.

Be careful that the seat does not
hit a passenger or luggage.

After adjusting the seat position, re-
lease the lever and try sliding the
seat forward and backward to make
sure it is locked in position.

After adjusting the seatback, push
your body back against the seat to
make sure the seat is locked in
position.

Do not put objects under the seats.
Otherwise, the objects may interfere
with the seat−lock mechanism or
unexpectedly push up the seat posi-
tion adjusting lever and the seat
may suddenly move, causing the
driver to lose control of the vehicle.

—Seat adjustment precautions

«
...
121
122
123
124
125
...
»

Summary of Contents for Corolla 2008























































































































































































































































































































Reviews:

No comments

Related manuals for Corolla 2008

Brand: 3SIXT Pages: 12

Brand: FORM FIT Pages: 2

Edge Flush Rail

Brand: Thule Pages: 12

Brand: Brodit Pages: 2

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Brand: Caltrend Pages: 2

Brand: Audiovox Pages: 1

EGR-3PVE-COLOUR

Brand: EGR Pages: 28

Brand: Prorack Pages: 20

Brand: Mobility Networks Pages: 52

Brand: TATA Motors Pages: 166

Brand: Advanced Diagnostics Pages: 10

Brand: Fiat Pages: 284

Brand: Volvo Pages: 92

Brand: Whispbar Pages: 14

TuneBase F8Z442

Brand: Belkin Pages: 162

Brand: Mazda Pages: 1001

Brand: Ford Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands