Toyota Corolla 2008 Owner'S Manual Download Page 15 | Manualshive

Page: 15 / 310

Toyota Corolla 2008 Owner'S Manual Download Page 15

’08 Corolla_U (L/O 0706)

189

2008 COROLLA from Aug. ’07 Prod. (OM12B28U)

7. “TUBELESS” or “TUBE

TYPE”—A tubeless tire does not
have a tube inside the tire and air
is directly filled in the tire. A tube
type tire has a tube inside the tire
and the tube maintains the air
pressure.

8. Load limit at maximum cold tire

inflation pressure—For details,
see “Vehicle load limits” on page
201 and “Checking and replacing
tires” on page 269.

9. Maximum cold tire inflation

pressure—This means the pres-
sure to which a tire may be in-
flated. For details about recom-
mended cold tire inflation
pressure, see “Tires” on page 292.

10.Summer tire or all season

tire—An all season tire has “M+S”
on the sidewall. The tire not
marked with “M+S” is a summer
tire. For details, see “Types of
tires” on page 204.

«
...
13
14
15
16
17
...
»

Summary of Contents for Corolla 2008























































































































































































































































































































Reviews:

No comments