Total Control MP/16, Operator'S Manual

Page: 31 / 182

Modem Setup 2-19
NOTE: The Ethernet connectors on the MP/16 are used only for
SNMP management—they can NOT be used for data transfer to
or from the modems.
Setting Modem DIP Switches
The modem DIP switches define the basic power-on/reset defaults
for the modems in the MP/16. Use the table on the following page
to set the DIP switches for compatibility with your system.
The following illustration shows the location of the modem DIP
switches:
Modem DIP
Switches
Figure 2-11. Location of Modem DIP Switches
The first set of DIP switches controls modems 1-8, and the second
set controls the same functions for modems 9-16. The UP position
sets the switch OFF; DOWN sets the switch ON.