Total Control MP/16, Operator'S Manual

Page: 141 / 182

AT Command Reference D-17
%F n
Remotely configure data format. See
Remote Configuration
in
Appendix C.
%F0 No parity, 8 data bits.
%F1 Mark parity, 7 data bits.
%F2 Odd parity, 7 data bits.
%F3 Even parity, 7 data bits.
%L= password Assign an account password as the local access password.
See
Link Security
in Chapter 4.
%P n =
Disables remote access password security (n =0 or 1) when no
character follows the equal sign.
%P n = s
Specify the following remote access password string (
s
) for viewing
privileges only ( n = 0) or view and configuration privileges ( n= 1).
%P n ?
Display remote access password
n
.
%T
Tone recognition. Enables the modem, when off hook, to detect the
tone frequencies of dialing modems. %T is meant primar ily for use
with network applications, but may also be integrated into certain
software programs. For example, %T could be used in a security
program to identify incoming tone security codes.
To enable %T, type ATH1 to force the modem off hook. Then type
AT%T.
%V= password
Assign Autopass password for Link Security.