Total Control MP/16, Operator'S Manual

Page: 179 / 182

Index
Index
A
Accounting
through NMC MIB............................ 3-24
Analog Loopback.................................... E-2
Answer
DIP Switch 5 (enable/disable) .......... 2-20
force (AT command)..........................D-1
number of rings before.....................D-18
tone (Bell answer tone)......................D-2
Answer Tone
disable..............................................D-22
setting duration................................D-23
ARQ (AT Command)............................D-12
Assigning IP Addresses................ 2-6–2-10
AT Commands
alphabetical reference ........................D-1
DIP Switch 8 (enable/disable) .......... 2-20
issuing remotely.................................C-5
issuing while online............................C-4
online help..........................................C-5
using..............................
See Appendix C
Attribute/Data Type Descriptions .......... 3-28
Authorized Access List..................2-11, B-7
defining through NMC MIB.............. 3-23
Auto Answer
DIP Switch 5.................................... 2-20
Autoconfigure....................................... 3-19
DTE Interface Table......................... 3-35
values used...................................... 3-20
B
Break Handling.....................................D-15
Break Length........................................D-21
C
Cable Kits............................................... 2-3
Call Duration
display................................................D-3
Canadian Users...................................... F-4
Card (NAC)............................................ 3-6
Carrier Detect
DIP Switch 6 (normal/override) ......... 2-20
Carrier Detect (CD)
AT Command.................................... D-9
CD .................................. See Carrier Detect
Chassis................................................... 3-2
Chassis MIB........................................... 3-6
Clear to Send (CTS)
Pin assignments.................................A-2
Clock (Modem)....................................... D-7
Command Tables, MIB........................... 3-2
Commands...................
See AT Commands
Community Strings.................................B-7
Compression, data (AT command)
...... D-11
Configuration
modems........................................... 2-23
Configuration Console ............................. 2-7
Configuration Menu .................................B-2
Configuration, IP Addresses ..........2-6–2-10
UI menus........................ See Appendix B
Configuration, management options ...... 2-11
Configuration, modem
cellular protocols................................ 4-7
default NVRAM settings................... 2-21
DIP switch settings.......................... 2-20
leased line...............................4-22–4-24
templates........................................... D-9
using SNMP management............... 2-22
Configuring, Console port
using MIB......................................... 3-15
Configuring, IP Addresses
menu guide.........................................B-8
Connect Messages......................4-16–4-21
DIP Switch 2 (verbal/numeric) .......... 2-20
DIP Switch 3 (display/suppress) ...... 2-20
DIP Switch 7 (disable in answer mode) 2-20
Connecting
the modems to another DCE ..............A-4
Connecting to the Telephone Company ..F-3
Connection Log..................................... 3-27
Connection Rate (AT Command)
......... D-12
CTS ................................ See Clear to Send
Custom Cables............................... A-1–A-4