Total Control MP/16, Operator'S Manual

Page: 180 / 182

Index
D
Data Carrier Detect (DCD)
Pin assignment.................................. A-2
Data Set Ready (DSR)
AT Command...................................D-13
setting pulse duration.......................D-21
Data Terminal Ready (DTR)
AT Command.....................................D-9
DIP Switch 1.................................... 2-20
Pin assignment.................................. A-2
setting recognition time....................D-21
Data Type Descriptions........................ 3-28
DCD .......................
See Data Carrier Detect
Default, IP Addresses............................. 2-7
Defaults, modem......................... 2-19–2-23
DIP switch setting to load from NVRAM 2-20
setting using DIP switches ............... 2-19
stored in modem's NVRAM .............. 2-21
Diagnostics.............................................D-4
Dial
AT command.....................................D-2
Dial Test................................................. E-9
Dialing
setting seconds before.....................D-18
Dial-Up Management ............................ 2-16
Digital Loopback..................................... E-5
DIP Switches
location............................................... 2-3
modem............................................. 2-19
Disconnect Reason................................D-5
DTE
connecting to.................................... 2-18
DTR..................... See Data Terminal Ready
Dumb mode
DIP Switch 8.................................... 2-20
E
Echo, Command Mode Local
DIP Switch 4.................................... 2-20
EIA RS-232 Pinouts....................... A-1–A-4
EIA RS-232 serial cable kits
................... 2-3
Enterprise number.................................. 3-1
Entities.................................................... 3-6
Entity Index............................................. 3-7
Error Control (AT Command)...............D-12
Escape Code
DIP Switch 9 (set function of).......... 2-20
setting character for........................ D-18
ETC protocol........................................... 4-7
Event Log.............................................. 3-25
Event Logging
through NMC MIB............................ 3-24
F
FCC Registration....................................F-3
Flow Control, hardware
received data (AT Command) ......... D-13
Flow Control, software
received data (AT command) .......... D-11
transmit data (AT Command) .......... D-10
G
Gateway IP Address...............................B-5
Ground Signal
Pin assignment...................................A-2
Guard Time.......................................... D-19
H
Handshaking Options.......................... D-22
I
IC (Industry Canada)...............................F-5
Inactivity Timer..................................... D-21
Initialization String.................................. C-2
Inquiry (AT Command).......................... D-3
Internet ID
chassis MIB....................................... 3-6
modem MIB...................................... 3-34
NMC MIB......................................... 3-14
IP Addresses
assigning...................................2-6–2-10
default................................................ 2-7
ITU-T Answer Sequence....................... D-2
L
LAN Installations..........................2-11–2-12
Leased Line..................................4-22–4-24
LEDs....................................................... 2-4
MIB configuration............................... 3-8
Lights...................................................... 2-4
Link Diagnostics..................................... D-4