Total Control MP/16, Operator'S Manual

Page: 17 / 182

Placement 2-5
Placement
The MP/16 must be placed in a location with access to the
following:
♦
A standard grounded 115V AC wall socket or power supply
♦
Analog phone lines
♦
The router, terminal adapter, or other DTE to which you will
connect the modem EIA RS-232 ports
♦
An Ethernet LAN segment, if you plan to manage the MP/16
from a LAN. An isolated LAN segment is recommended
Placing the MP/16 on a Desktop
Stick the rubber feet (included) into the four recesses on the bottom
of the unit and place on a flat, hard surface. This leaves room
below for adequate ventilation.
CAUTION:
!
Use the rubber feet to provide ventilation under the unit.
!
Do not block the fan on the side of the unit.
!
Do not stack MP/16s more than 8 units high.
Mounting in a Rack
1
Attach the provided flanges to the sides of the MP/16 using the
four screws that came with them.
Figure 2-3. Attaching the Flanges