Total Control MP/16, Operator'S Manual

Page: 119 / 182

Using AT Commands C-5
Help/Command Summary Requests
The following commands can be used to display a summary of AT
commands.
$ Basic command summary.
&$ Ampersand command summary.
%$ Extended command summary.
D$ Dial command summary.
S$ S-Register summary.
S
r
? Display conten ts of Register
r.
Viewing Configurations
The I4 command displays the current values for all AT command
variables and S-Registers to the terminal screen. The I5 command
displays the same information for settings stored in NVRAM.
Remote Access
Remote Access allows you or someone else to use AT commands
from a remote location by dialing into the modem.
Be aware of the following terms used when describing remote
access operations:
Host
Refers to the modem that will be accessed and
controlled by a remote modem.
Guest
Refers to the modem that will access and control the
host modem.