Total Control MP/16, Operator'S Manual

Page: 14 / 182

2-2 Installation
Required Accessories
The Total Control MP/16 comes with the following materials:
♦
Power cord
♦
16 analog phone cords
♦
One RJ45-to-DB-25 serial cable
♦
One null mo dem adapter
♦
Four rubber feet for placing the unit on a desktop.
♦
Two metal flanges and four screws for rack mounting the unit.
♦
One 3.5" floppy diskette containing the Total Control MP/16
Enterprise Specific MIBs
In addition to the provided hardware, you must have the following
to successfully install the Total Control MP/16:
♦
A PC running terminal emulator software.
♦
A good, working knowledge of TCP/IP and an addressing
strategy for your network. Your addressing strategy should
take into account the size of the network, the number of
physical networks, expected growth, and maintenance.
♦
EIA RS-232 serial cables to attach the modem ports to the
router, terminal adapter or other Data Terminal Equipment
(DTE).
If your equipment does not provide an RJ45 interface, consider
the purchase of one of three kinds of U.S. Robotics cable kits.
The following kits are available. Ask your distributor for
ordering information.