Toshiba TOSVERT VF-FS1 Series, Instruction Manual

Page: 223 / 252

E6581381
K-15
11
■
Table of input terminal functions 1
Function
No.
Code Function Action
0 - No function is assigned Disabled
1 ST Standby terminal ON: Ready for operation
OFF: Coast stop (gate off)
2 F Forward run command ON: Forward run OFF: Slowdown stop
3 R Reverse run command ON: Reverse run OFF: Slowdown stop
5 AD2 Acceleration/deceleration 2 pattern selection ON: Acceleration/deceleration 2
OFF: Acceleration/deceleration 1 or 3
6 SS1 Preset-speed command 1
7 SS2 Preset-speed command 2
8 SS3 Preset-speed command 3
Selection of 7-speed with SS1 to SS3 (3bits)
10 RES Reset command ON: Acceptance of reset command
ON
→
OFF: Trip reset
11 EXT Trip stop command from external input device ON:
G
Trip stop
13 DB DC braking command ON: DC braking
14 PID PID control prohibited ON: PID control prohibited
OFF: PID control permitted
15 PWENE Permission of parameter editing ON: Parameter editing permitted
OFF: Parameter editing prohibited (If
H = )
16 ST+RES Combination of standby and reset commands ON: Simultaneous input from ST and RES
20 F+AD2 Combination of forward run and
acceleration/deceleration 2 ON: Simultaneous input from F and AD2
21 R+AD2 Combination of reverse run and
acceleration/deceleration 2 ON: Simultaneous input from R and AD2
22 F+SS1 Combination of forward run and preset-speed
command 1 ON: Simultaneous input from F and SS1
23 R+SS1 Combination of reverse run and preset-speed
command 1 ON: Simultaneous input from R and SS1
24 F+SS2 Combination of forward run and preset-speed
command 2 ON: Simultaneous input from F and SS2
25 R+SS2 Combination of reverse run and preset-speed
command 2 ON: Simultaneous input from R and SS2
26 F+SS3 Combination of forward run and preset-speed
command 3 ON: Simultaneous input from F and SS3
27 R+SS3 Combination of reverse run and preset-speed
command 3 ON: Simultaneous input from R and SS3
30 F+SS1+AD2 Combination of forward run, preset-speed
command 1 and acceleration/deceleration 2 ON: Simultaneous input from F, SS1 and AD2
31 R+SS1+AD2 Combination of reverse run, preset-speed
command 1 and acceleration/deceleration 2 ON: Simultaneous input from R, SS1 and AD2
32 F+SS2+AD2 Combination of forward run, preset-speed
command 2 and acceleration/deceleration 2 ON: Simultaneous input from F, SS2 and AD2
33 R+SS2+AD2 Combination of reverse run, preset-speed
command 2 and acceleration/deceleration 2 ON: Simultaneous input from R, SS2 and AD2
34 F+SS3+AD2 Combination of forward run, preset-speed
command 3 and acceleration/deceleration 2 ON: Simultaneous input from F, SS3 and AD2
35 R+SS3+AD2 Combination of reverse run, preset-speed
command 3 and acceleration/deceleration 2 ON: Simultaneous input from R, SS3 and AD2
38 FCHG Frequency command forced switching ON:
H
 (If
H
= )
OFF: HOQF
39 VF2 No.2 Switching of V/F setting ON: No.2 V/F setting
( RV =0, H , H , H , H )
OFF: No.1 V/F setting
(Set value of
RV
,
XN
,
XNX
,
XD
,
VJT
)
40 MOT2 No.2 motor switching
（ VF2 ＋ AD2 ＋ OCS2 ）
ON: No.2 motor
(
RV
=0,
H
,
H
,
H
,
H
,
H , H , H , H )
OFF: No.1 motor (Set value of RV , XN , XNX ,
XD
,
VJT
,
CEE
,
FGE
,
H
,
H
)
41 UP Frequency UP signal input from external contacts ON: Increase in frequency
42 DOWN Frequency DOWN signal input from external
contacts ON: Reduction in frequency