Toshiba TOSVERT VF-FS1 Series, Instruction Manual

Page: 58 / 252

E6581381
D-4
4
4.2.1 How to set the basic parameters
All of the basic parameters can be set by the same step procedures.
Switches to the setting monitor mode.
* Parameters were
factory-set by default
before shipment.
* Select the parameter to
be changed from "Table
of parameters".
* If there is something
that you do not
understand during the
operation, press the
MODE key to return to
the
indication.
⇒
See section 11.2 for
basic parameters.
Reads the programmed parameter
setting.
Saves the changed value of the
parameter setting.
Selects parameter to be changed.
Changes the parameter setting.
[Steps in key entry for basic parameters]
■
Example of setting procedure (Changing the maximum frequency from 80Hz to 60Hz).
Key operated LED display Operation
Displays the operation frequency (operation stopped).
(When standard monitor display selection
H = [Operation
frequency])
CWH
The first basic parameter “
CWH
” (Wizard function) is displayed.
HJ
Press either the or key to select “ HJ ”.
Pressing the ENT key reads the maximum frequency.
Press the key to change the maximum frequency to 60Hz.
⇔
HJ
Press the ENT key to save the maximum frequency. HJ and the
frequency are displayed alternately.
After this, →
Displays the same
programmed
parameter.
→
Switches to the
display in the
status monitor
mode.
→
Displays names
of other
parameters.
ENT MODE
ENT
ENT
MODE
MODE
ENT
ENT