Toshiba TOSVERT VF-FS1 Series, Instruction Manual

Page: 9 / 252

E6581381
7
II
II. Introduction
Thank you for your purchase of the Toshiba "TOSVERT VF-FS1” industrial inverter.
This is the Ver.100 / Ver.101 CPU version inverter.
Please be informed that CPU version will be frequently upgraded.
■
Features
1. Built-in noise filter
1) All models in both the 200V and 400V series have a noise filter inside.
2) Can be compliant with European CE marking standard
3) Reduces space requirements and cuts down on time and labor needed in wiring.
2. Simple operation
1) Automatic functions (history, wizard, acceleration/deceleration time, and function programming)
Just by wiring the motor to the power supply allows instant operation without the need to program
parameters.
2) The RUN/STOP button and LOC/REM button allow easy operation.
3. Superior basic performance
1) Automatic energy-saving
2) Smooth operation : Reduced rotation ripple through the use of Toshiba's unique waveform formation.
3) Built-in current surge suppression circuit : Can be safely connected even if power load is low.
4) Maximum 200Hz high frequency output : Optimum for use with high speed motors such as those in
lumber machinery and milling machines.
5) Maximum carrier frequency : 16kHz quiet operation
Toshiba's unique PWM control reduces noise at low carrier.
4. Globally compatible
1) Compatible with 200V and 400V power supplies
2) Conforms to CE marking and with UL, CSA.
3) Sink/source switching of control input.
5. Options allow use with a wide variety of applications
•
Internal communications devices (LonWorks
®
, BACnet
®
, Metasys
®
N2, Siemens APOGEE
TM
FLN.)
•
Extension panel/Parameter writer
•
EMC noise reduction filter
•
Other options are common to all models
6. Extended power range
•
Wide range of powers up to 30kW for this class of inverter.