![background image](http://html1.mh-extra.com/html/thermofisher-scientific/dxr-xi/dxr-xi_user-manual_1105625022.webp)
Operating the Microscope
14
DXRxi User Guide
Thermo Scientific
Powering the System Up or Down
To power up the system
1. Turn on the power strip.
2. Hold down the blue power button on the front of the microscope keypad for three (3)
seconds.
3. Ensure stage controller switch is on.
4. Ensure illuminator switch is on (if using the brightfield/darkfield illuminator).
5. Power up the computer and monitor(s).
To power down the system
1. Shut down the computer.
2. Turn off the power strip.
Loading a Sample
The sample must be held securely to prevent movement during image collection. This is
commonly done by affixing the sample to a glass slide using double-sided adhesive tape or an
epoxy. We offer a wide selection of sample holders to accommodate many different sample
types. Contact your sales representative for more information.
When installing a sample holder be sure to install it in the orientation shown. For collections
over large areas while maintaining focus the sample holder must be leveled to the stage
bearings. This is done by adjusting the 3 set screws in the sample holder. After adjustment is
complete, secure the sample holder with the 3 hold-down screws.
Summary of Contents for DXR xi
