manualshive.com logo in svg

ThermoFisher Scientific DXR xi, User Manual

Share
Download
ThermoFisher Scientific DXR xi User Manual Download Page 34

Operating the Microscope

26

DXRxi User Guide

Thermo Scientific

Use the 

Illumination Intensity control

 on the illuminator power supply to adjust the 

brightness.

Figure 23. 

Illumination intensity control for optional BF/DF Illuminator

Controlling Illumination with the Optional Reflected Light Brightfield Illuminator

If your system has the optional reflected light illuminator, the light path is always configured 
for reflected light brightfield illumination. Use the 

View Path control

 to direct light through 

the microscope eyepiece or to the video camera (to produce a video image in the software) or 
both. The View Path control is normally set to the middle position which sends light to both 
locations.

Use the 

Illumination Intensity control

 on the microscope to adjust the brightness.

Figure 24. 

Illumination intensity control for the reflected light brightfield (only) illuminator

Illumination intensity 
control

Illuminator power 
supply

Illuminator power 
supply

Illumination 
Intensity control

View path control

Summary of Contents for DXR xi















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands