Thermo Scientific thermoscientific Vanquish Pumps C, Operating Manual

Page: 247 / 296

10 • Modifying the Pump for Specific Applications
Pumps C, Pumps F ( VC-Pxx, VF-Pxx)
Operating Manual Page 247
No. Description
1 Mounting holes for mounting bracket (covered by push rivets while no
mounting bracket is installed in this position)
2 Mounting bracket
3 Mounting screws (Torx)
Follow these steps
1. Connect the capillary mixer on the purge/sensor unit. Mind the
direction of flow through the capillary mixer (indicated by the arrow
on the mixer).
TIP To facilitate installation of the inline filter, loosely tighten the
capillary mixer on the purge/sensor unit so that you can easily access
the free end of the capillary.
2. Connect the inline filter to the capillary mixer. Mind the direction of
flow through the inline filter (indicated by the arrow on the filter).
3. Turn and insert the assembly of inline filter and capillary mixer into
the mounting bracket.
Figure 81: Inline filter with capillary mixer installed
No. Description
1 Inline filter
2 Capillary mixer
4. Tighten the capillary mixer on the purge/sensor unit.
5. Reinstall the seal wash detector assembly in the pump (see
Replacing the Seal Wash Detector ( } page 134) ).
6. Reconnect the system pressure sensor cable.