C-Link Protocol Commands
Communications Configuration
B-40
Model 48
i
Instruction Manual
Thermo Fisher Scientific
Send:
set
date
12-01-09
Receive:
set date 12-01-09 ok
set default params
This command sets all the parameters to their default values. This does not
affect the factory-calibrated parameters.
Send:
set default params
Receive:
set default params ok
save
set save params
This command stores all current parameters in FLASH memory. It is
important that each time instrument parameters are changed, that this
command be sent. If changes are not saved, they will be lost in the event of
a power failure. The following example saves the parameters to FLASH
memory.
Send:
set
save
params
Receive:
set save params ok
time
This command reports the current time (24-hour time). The following
example reports that the internal time is 2:15:30 pm.
Send:
time
Receive: time
14:15:30
set time
hh:mm:ss
hh
= hours
mm
= minutes
ss
= seconds
This command sets the internal clock (24-hour time). The following
example sets the internal time to 2:15 pm.
Note
If seconds are omitted, the seconds default to 00.
▲
Send:
set
time
14:15
Receive:
set time 14:15 ok
addr dns
This command reports the TCP/IP address for the domain name server.
Send:
addr
dns
Receive:
addr dns 192.168.1.1
Communications
Configuration
