![background image](http://html1.mh-extra.com/html/texas-instruments/tms320c28x/tms320c28x_reference-manual_1097071401.webp)
NEG ACC
6-244
NEG ACC
Negate Accumulator
SYNTAX OPTIONS
OPCODE
OBJMODE
RPT
CYC
NEG ACC
1111 1111 0101 0100
X
−
1
Operands
ACC
Accumulator register
Description
Negate the contents of the ACC register:
if(ACC = 0x8000 0000)
{
V = 1;
if(OVM = 1)
ACC = 0x7FFF FFFF;
else
ACC = 0x8000 0000;
}
else
ACC = −ACC;
if(ACC = 0x0000 0000)
C = 1;
else
C = 0;
Flags and
Modes
N
After the operation, the N flag is set if bit 31 of the ACC is 1, else N is cleared.
Z
After the operation, the Z flag is set if the ACC is zero, else Z is cleared.
C
If (ACC = 0), set C; otherwise, clear C.
V
If (ACC = 0x8000 0000) at the start of the operation, this is considered an
overflow value and V is set. Otherwise, V is not affected.
OVM
If (ACC = 0x8000 0000) at the start of the operation, this is considered an
overflow value, and the ACC value after the operation depends on the state
of OVM: If OVM is cleared, ACC will be filled with 0x8000 0000. If OVM is set
ACC will be saturated to 0x7FFF FFFF.
Repeat
This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
Example
; Negate contents of VarA, make sure value is saturated:
MOVL ACC,@VarA
; Load ACC with contents of VarA
SETC OVM
; Turn overflow mode on
NEG ACC
; Negate ACC and saturate
MOVL @VarA,ACC
; Store result into VarA
Summary of Contents for TMS320C28x
