![background image](http://html1.mh-extra.com/html/texas-instruments/tms320c28x/tms320c28x_reference-manual_1097071368.webp)
MOVL loc32,XT
6-211
MOVL loc32,XT
Store the XT Register
SYNTAX OPTIONS
OPCODE
OBJMODE
RPT
CYC
MOVL loc32,XT
1010 1011 LLLL LLLL
1
−
1
Operands
loc32
Addressing mode (see Chapter 5)
XT
Multiplicand register
Description
Store the T register into 32-bit location pointed to by the “loc32” addressing
mode:
[loc32] = XT;
Flags and
Modes
N
If (loc32 = @ACC) and bit 31 of the ACC register is 1, then the N bit is set;
otherwise, N is cleared.
Z
If (loc32 = @ACC) and the value of ACC after the load is zero, then the Z bit is
set; otherwise Z is cleared.
Repeat
This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
Example
; Calculate using 32-bit multiply, retaining high result:
; Y = (X0*C0) >> 2) + (X1*C1 >> 2) + (X2*C2 >> 2)
; X2 = X1
; X1 = X0
SPM −2
; Set product shift to >> 2
ZAPA
; Zero ACC, P, OVC
MOVL XT,@X2
; XT = X2
QMPYL P,XT,@C2
; P = XT*C2
MOVL XT,@X1
; XT = X1, ACC = X2*C2 >> 2
QMPYAL P,XT,@C1
; P = XT*C1
MOVL @X2,XT
; X2 = X1
MOVL XT,@X0
; XT = X0, ACC = X1*C1 >> 2 + X2*C2 >> 2
QMPYAL P,XT,@C0
; P = XT*C0
MOVL @X1,XT
; X1 = X0
ADDL ACC,P << PM
; ACC = X0*C0 >> 2 + X1*C1 >> 2 + X2*C2 >> 2
MOVL @Y,ACC
; Store result into Y
Summary of Contents for TMS320C28x
