62
last symbol rate displayed in the list and then press the
OK
key afterwards.
Search mode
>
You can use the
Search mode
line to decide, if you want to search for freely recei-
vable programs or encoded programs as well.
>
Use the
up/down arrow keys
to highlight the search mode line and then press the
OK
key to decide whether you want to search freely receivable programs (
Only
free
) only or encoded programs (
All
) as well.
Starting a search
>
Use the
up/down arrow keys
to highlight the
Start search
line.
>
Now press the
OK
key to start the search.
Pay attention to further messages on the screen.
>
You can abort the search run by pressing the
red
control key.
9.4.3 Manual search
You can use a specific Frequency (Section 10 Technical terms) to search for programs. You
must enter the following data for this purpose:
Channel frequency
Enter the frequency in this line, at which the program that you are looking for is broadcast on.
>
Use the up/down arrow keys to highlight the
Channel frequency
line.
>
Use the
numerical keypad
to enter the relevant frequency.
Symbol rate
Enter the symbol rate, with which the program is transmitted, in this line.
>
Use the
up/down arrow keys to highlight the
Symbol rate
line.
>
Use the
numerical keypad
to enter the symbol rate that you want to use.
Modulation
Enter the modulation process to be used in this line.
>
Use the
up/down arrow keys to highlight the modulation
line.
>
Press the
OK
key (several times might be needed) to select the modulation process
that you want to use.
Search mode
>
Use the
Search mode
line to decide if you only want to search for freely receivable
programs or for encoded programs as well.
>
Use the
up/down arrow keys
to highlight the search mode line and press the
OK
key to decide, whether you want to look for freely receivable programs (
Only free
)
only or encoded programs (
All
) as well.
Starting a search
>
Use the
up/down arrow keys
to highlight the
Start search
line.
>
Now press the
OK
key to start the search.
Pay attention to the messages displayed on the screen.
>
You can abort the search run by pressing the
red
control key.
49773_DigiCorder_K2_EN.qxd 1.11.2007 14:57 Str. 62
