36
8.1.2.3 Changing the Timer programing
>
First call up the
Timer overview
, as described in Section 8.1.2.2.
>
Use the
up/down arrow keys
to mark the Timer event if you want to change the
Timer settings.
>
Press the
green Alter
control key to jump to the marked Timer settings.
Now edit these as described in Section 8.1.2.1.
>
Use the
up/down arrow keys
to select any of the
Type
fields displayed.
>
Press
OK
to confirm.
This will open up a window displaying the available Timer types.
>
Use the
up down arrow keys
to select the Timer type that you want.
>
The Timer type can be imported by pressing the
OK
key.
>
Press the
green Import
control key to save the data in the memory.
8.1.2.4 Deleteing the timer programing
>
First call up the
Timer overview
as described in Section 8.1.2.2.
>
Use the
up/down arrow keys
to select an existing timer setting for deletion
>
Press the
yellow Delete
control key.
“Do you really want to delete this Timer?” will now be displayed.
>
Use the
left/right arrow keys to mark Yes
.
>
Press
OK
to delete the timer.
8.1.2.5 programing a new Timer event
>
A new Timer event can be programd by using the
up/down arrow keys
to mark a
free line in the
Timer overview
menu.
>
Press the
greenNew
control key to jump to the window for programing a new
Timer event. Now edit this as described in Section 8.1.2.1.
>
Use the
up/down arrow keys
to select any of the
Type
fields that are displayed.
>
Press
OK
to confirm.
This will open a window displaying the available Timer types.
>
Use the
up/down arrow keys
to select the required Timer type.
>
The Timer type can be accepted by pressing
OK
.
>
Press the
green Accept
control key to save the data in the memory after you have
completed programing.
Note!!!
Ensure that the device has also stored the time. This is indicated during operation in the
Infobox and in the standby mode on the display (if activated in Section 6.2.4). If this is not
the case, leave your device switched to ZDF for approx. 30 seconds, so that the time
can be read in.
49773_DigiCorder_K2_EN.qxd 1.11.2007 14:57 Str. 36
