39
>
Press the
blue
or
red
function keys once again to wind forwards or backwards in
10
minute steps
.
>
When you have reached the position in the recording that you were looking for,
you can return to normal replay mode by pressing the
yellow
control key.
8.2.1.4 Jogshuttle function
The receiver also has a so-called Jogshuttle function that enables you to find a part of he
recording quickly and precisely. Proceed as follows to use it:
>
Whilst recording press the
Jogshuttle On/Off
key (Freeze image) to jump to
Jogshuttle mode.
The replaying of the recording will be stopped (Freeze image). “
II” will be displayed
on the screen.
Slow motion
>
Press the
right arrow key once
to replay the recording in slow motion.
“I
” will be displayed on the screen.
Single frame forwarding
>
Press the
up
or
down arrow keys
to replay the next single frame in the
forward
or
backwards
direction.
Fast forward and backwards winding
>
Press the
left/right arrow keys
several times to change the replay speed and
direction.
The individual replay modes will be displayed in accordance with the following table.
>
Whilst
or
are being displayed, you can press the
right
or
left
arrow keys
to wind forward or backwards in 10 minute steps.
Setting an image
>
Press the
record
key to save a single image on the hard disk.
Saved images can be called up as described in Section 8.2.3.
An image should only be made from a Freeze image picture whilst “
II
” is displayed
in order to prevent image errors / distortion.
8.2.1.5 Setting a mark
>
Wind as described previously to the recording position, where you wantt to insert a
mark.
>
Press the
Record
key to set a mark at the selected position.
Display
Playback mode
Replay
Fast forward 4 x speed
Fast forward 16 x speed
Fast forward 64 x speed
Rewind 4 x speed
Rewind 16 x speed
Rewind 64 x speed
I
Slow motion
II
Pause
49773_DigiCorder_K2_EN.qxd 1.11.2007 14:57 Str. 39
