Supermicro SSE-G2252, User Manual

Page: 810 / 1401

Chapter 24: General Security Measures
Port Security
– 821 –
E
XAMPLE
The following example enables port security for port 5, and sets the
response to a security violation to issue a trap message:
Console(config)#interface ethernet 1/5
Console(config-if)#port security action trap
R
ELATED
C
OMMANDS
show interfaces status (936)
shutdown (928)
mac-address-table static (1014)
port security
mac-address-as-
permanent
Use this command to save the MAC addresses that port security has
learned as static entries.
S
YNTAX
port security mac-address-as-permanent [ interface interface ]
interface - Specifies a port interface.
ethernet unit / port
unit - This is unit 1.
port - Port number. (Range: 1-52)
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
This example shows the switch saving the MAC addresses learned by port
security on ethernet port 1/3.
Console#port security mac-address-as-permanent interface ethernet 1/3
Console#
show port security
This command displays port security status and the secure address count.
S
YNTAX
show port security [ interface interface ]
interface - Specifies a port interface.
ethernet unit / port
unit - This is unit 1.
port - Port number. (Range: 1-52)
C
OMMAND
M
ODE
Privileged Exec