Supermicro SSE-G2252, User Manual

Page: 543 / 1401

Chapter 15: Multicast Filtering
MLD Snooping (Snooping and Query for IPv6)
– 550 –
C
OMMAND
U
SAGE
MLD Snooping must be enabled globally on the switch (see “Configuring
MLD Snooping and Query Parameters” on page 547 ) before a multicast
router port can take effect.
P
ARAMETERS
These parameters are displayed:
•
VLAN – Selects the VLAN which is to propagate all IPv6 multicast traffic
coming from the attached multicast router. (Range: 1-4094)
•
Interface – Activates the Port or Trunk scroll down list.
•
Port or Trunk – Specifies the interface attached to a multicast router.
W
EB
I
NTERFACE
To specify a static interface attached to a multicast router:
1.
Click Multicast, MLD Snooping, Multicast Router.
2.
Select Add Static Multicast Router from the Action list.
3.
Select the VLAN which will forward all the corresponding IPv6 multicast
traffic, and select the port or trunk attached to the multicast router.
4.
Click Apply.
Figure 15-23: Configuring a Static Interface for an IPv6 Multicast Router
To show the static interfaces attached to a multicast router:
1.
Click Multicast, MLD Snooping, Multicast Router.
2.
Select Show Static Multicast Router from the Action list.
3.
Select the VLAN for which to display this information.