Supermicro SSE-G2252, User Manual

Page: 545 / 1401

Chapter 15: Multicast Filtering
MLD Snooping (Snooping and Query for IPv6)
– 552 –
•
When a multicast address is assigned to an interface in a specific VLAN,
the corresponding traffic can only be forwarded to ports within that
VLAN.
P
ARAMETERS
These parameters are displayed:
•
VLAN – Specifies the VLAN which is to propagate the multicast service.
(Range: 1-4094)
•
Multicast IPv6 Address – The IP address for a specific multicast
service.
•
Interface – Activates the Port or Trunk scroll down list.
•
Port or Trunk – Specifies the interface assigned to a multicast group.
•
Type (Show Current Member) – Shows if this multicast stream was
statically configured by the user, discovered by MLD Snooping, or is a
data stream to which no other ports are subscribing (i.e., the stream is
flooded onto VLAN instead of being trapped to the CPU for processing,
or is being processed by MVR6).
W
EB
I
NTERFACE
To statically assign an interface to an IPv6 multicast service:
1.
Click Multicast, MLD Snooping, MLD Member.
2.
Select Add Static Member from the Action list.
3.
Select the VLAN that will propagate the multicast service, specify the
interface attached to a multicast service (through an MLD-enabled
switch or multicast router), and enter the multicast IP address.
4.
Click Apply.
Figure 15-26: Assigning an Interface to an IPv6 Multicast Service
To show the static interfaces assigned to an IPv6 multicast service:
1.
Click Multicast, MLD Snooping, MLD Member.
2.
Select Show Static Member from the Action list.
3.
Select the VLAN for which to display this information.