Supermicro SSE-G2252, User Manual

Page: 235 / 1401

Chapter 11: Quality of Service
Configuring a Class Map
– 241 –
•
Description – A brief description of a class map. (Range: 1-64
characters)
Add Rule
•
Class Name – Name of the class map.
•
Type – The criteria specified by the match command. (This field is set
on the Add page.)
•
ACL – Name of an access control list. Any type of ACL can be specified,
including standard or extended IPv4/IPv6 ACLs and MAC ACLs.
•
IP DSCP – A DSCP value. (Range: 0-63)
•
IP Precedence – An IP Precedence value. (Range: 0-7)
•
IPv6 DSCP – A DSCP value contained in an IPv6 packet. (Range: 0-63)
•
VLAN ID – A VLAN. (Range:1-4094)
•
CoS – A CoS value. (Range: 0-7)
W
EB
I
NTERFACE
To configure a class map:
1.
Click Traffic, DiffServ.
2.
Select Configure Class from the Step list.
3.
Select Add from the Action list.
4.
Enter a class name.
5.
Set the Type to match any rule or all rules.
6.
Enter a description.
7.
Click Add.
Figure 11-1: Configuring a Class Map
To show the configured class maps:
1.
Click Traffic, DiffServ.