Supermicro SSE-G2252, User Manual

Page: 22 / 1401

Chapter 1: Introduction
System Defaults
– 24 –
S
YSTEM
D
EFAULTS
The switch’s system defaults are provided in the configuration file
“Factory_Default_Config.cfg.” To reset the switch defaults, this file should
be set as the startup configuration file.
The following table lists some of the basic system defaults.
Table 1-2: System Defaults
Function Parameter Default
Console Port Connection Baud Rate 9600 bps
Data bits 8
Stop bits 1
Parity none
Local Console Timeout 600 seconds
Authentication and
Security Measures
Privileged Exec Level Username “ADMIN”
Password “ADMIN”
Normal Exec Level Username “guest”
Password “guest”
Enable Privileged Exec from
Normal Exec Level
Password “super”
RADIUS Authentication Disabled
Authentication Disabled
802.1X Port Authentication Disabled
Web Authentication Disabled
MAC Authentication Disabled
PPPoE Intermediate Agent Disabled
HTTPS Enabled
SSH Disabled
Port Security Disabled
IP Filtering Disabled
DHCP Snooping Disabled
IP Source Guard Disabled (all ports)
Web Management HTTP Server Enabled
HTTP Port Number 80
HTTP Secure Server Disabled
HTTP Secure Server Port 443