Chapter 15: Multicast Filtering
Multicast VLAN Registration for IPv6
– 577 –
•
MRV6 domains can be associated with more than one MVR6 profile. But
since MVR6 domains cannot share the group range, an MRV6 profile
can only be associated with one MVR6 domain.
P
ARAMETERS
These parameters are displayed:
Configure Profile
•
Profile Name
– The name of a profile containing one or more MVR6
group addresses. (Range: 1-21 characters)
•
Start IPv6 Address
– Starting IP address for an MVR6 multicast
group. This parameter must be a full IPv6 address including the
network prefix and host address bits.
•
End IPv6 Address
– Ending IP address for an MVR6 multicast group.
This parameter must be a full IPv6 address including the network prefix
and host address bits.
Associate Profile
•
Domain ID
– An independent multicast domain. (Range: 1-5)
•
Profile Name
– The name of a profile to be assigned to this domain.
(Range: 1-21 characters)
W
EB
I
NTERFACE
To configure an MVR6 group address profile:
1.
Click Multicast, MVR6.
2.
Select Configure Profile from the Step list.
3.
Select Add from the Action list.
4.
Enter the name of a group profile to be assigned to one or more
domains, and specify a multicast group that will stream traffic to
participating hosts.
5.
Click Apply.
Figure 15-46: Configuring an MVR6 Group Address Profile
To show the configured MVR6 group address profiles:
Summary of Contents for SSE-G2252
