Supermicro SSE-G2252, User Manual

Page: 605 / 1401

Chapter 17: IP Services
Domain Name Service
– 612 –
P
ARAMETERS
These parameters are displayed:
•
Domain Lookup – Enables DNS host name-to-address translation.
(Default: Disabled)
•
Default Domain Name – Defines the default domain name appended
to incomplete host names. Do not include the initial dot that separates
the host name from the domain name.
(Range: 1-127 alphanumeric characters)
W
EB
I
NTERFACE
To configure general settings for DNS:
1.
Click IP Service, DNS.
2.
Select Configure Global from the Action list.
3.
Enable domain lookup, and set the default domain name.
4.
Click Apply.
Figure 17-1: Configuring General Settings for DNS
C
ONFIGURING A
L
IST
OF
D
OMAIN
N
AMES
Use the IP Service > DNS - General (Add Domain Name) page to configure
a list of domain names to be tried in sequential order.
CLI R
EFERENCES
•
“ip domain-list” on page 1321
•
“show dns” on page 1326
C
OMMAND
U
SAGE
• Use this page to define a list of domain names that can be appended to
incomplete host names (i.e., host names passed from a client that are
not formatted with dotted notation).
• If there is no domain list, the default domain name is used (see
“Configuring General DNS Service Parameters” on page 611 ). If there is
a domain list, the system will search it for a corresponding entry. If
none is found, it will use the default domain name.