Supermicro SSE-G2252, User Manual

Page: 559 / 1401

Chapter 15: Multicast Filtering
Multicast VLAN Registration for IPv4
– 566 –
•
Group IP Address – Defines a multicast service sent to the selected
port. Multicast groups must be assigned from the MVR group range
configured on the Configure General page.
W
EB
I
NTERFACE
To assign a static MVR group to an interface:
1.
Click Multicast, MVR.
2.
Select Configure Static Group Member from the Step list.
3.
Select Add from the Action list.
4.
Select an MVR domain.
5.
Select a VLAN and interface to receive the multicast stream, and then
enter the multicast group address.
6.
Click Apply.
Figure 15-38: Assigning Static MVR Groups to an Interface
To show the static MVR groups assigned to an interface:
1.
Click Multicast, MVR.
2.
Select Configure Static Group Member from the Step list.
3.
Select Show from the Action list.
4.
Select an MVR domain.
5.
Select the port or trunk for which to display this information.