Supermicro SSE-G2252, User Manual

Page: 405 / 1401

Chapter 14: Basic Administration Protocols
Simple Network Management Protocol
– 412 –
W
EB
I
NTERFACE
To configure an SNMP group:
1.
Click Administration, SNMP.
2.
Select Configure Group from the Step list.
3.
Select Add from the Action list.
macNotificationTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.138 This trap is sent when there are
changes of the dynamic MAC
addresses on the switch.
lbdDetectionTrap
1.3.6.1.4.1.259.
10.1.17.
10.1.39.2.1.0.14
1
This trap is sent when a loopback
condition is detected by LBD.
lbdRecoveryTrap
1.3.6.1.4.1.259.
10.1.17.
10.1.39.2.1.0.14
2
This trap is sent when a recovery is
done by LBD.
sfpThresholdAlarmWarnTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.189 This trap is sent when the SFP’s
monitored value is not within alarm/
warning thresholds.
udldPortShutdownTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.192 This trap is sent when the port is shut
down by UDLD.
userAuthenticationFailureTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.199 This trap will be triggered if
authentication fails.
userAuthenticationSuccessTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.200 This trap will be triggered if
authentication is successful.
loginTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.201 This trap is sent when user logs in.
logoutTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.202 This trap is sent when user logs out.
fileCopyTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.208 This trap is sent when file copy is
executed.
If the copy action is triggered by the
system, the login user information
(trapVarLoginUserName/
trapVarSessionType/
trapVarLoginInetAddressTypes/
trapVarLoginInetAddres) will be a null
value.
userauthCreateUserTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.209 This trap is sent when a user account is
created.
userauthDeleteUserTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.210 This trap is sent when a user account is
deleted.
userauthModifyUserPrivilegeTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.211 This trap is sent when user privilege is
modified.
cpuGuardControlTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.213 This trap is sent when CPU utilization
rises above the high-watermark the
first time or when CPU utilization rises
from below the low-watermark to
above the high-watermark.
cpuGuardReleaseTrap 1.3.6.1.4.1.259.10.1.39.2.1.0.214 This trap is sent when CPU utilization
falls from above the high-watermark to
below the low-watermark.
a. These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the SNMP
Configuration menu.
Table 14-10: Supported Notification Messages (Continued)
Model Level Group