Supermicro SSE-G2252, User Manual

Page: 600 / 1401

Chapter 16: IP Configuration
Setting the Switch’s IP Address (IP Version 6)
– 606 –
W
EB
I
NTERFACE
To show the IPv6 statistics:
1.
Click IP, IPv6 Configuration.
2.
Select Show Statistics from the Action list.
3.
Click IPv6, ICMPv6 or UDP.
Time Exceeded Messages The number of ICMP Time Exceeded messages sent by the
interface.
Parameter Problem
Message
The number of ICMP Parameter Problem messages sent by the
interface.
Echo Reply Messages The number of ICMP Echo Reply messages sent by the interface.
Router Solicit Messages The number of ICMP Router Solicitation messages sent by the
interface.
Neighbor Solicit Messages The number of ICMP Neighbor Solicit messages sent by the
interface.
Neighbor Advertisement
Messages
The number of ICMP Router Advertisement messages sent by the
interface.
Redirect Messages The number of Redirect messages sent. For a host, this object will
always be zero, since hosts do not send redirects.
Group Membership
Response Messages
The number of ICMPv6 Group Membership Response messages
sent.
Group Membership
Reduction Messages
The number of ICMPv6 Group Membership Reduction messages
sent.
UDP Statistics
Input The total number of UDP datagrams delivered to UDP users.
No Port Errors The total number of received UDP datagrams for which there was
no application at the destination port.
Other Errors The number of received UDP datagrams that could not be
delivered for reasons other than the lack of an application at the
destination port.
Output The total number of UDP datagrams sent from this entity.
Table 16-2: Show IPv6 Statistics - display description (Continued)
Field Description