Supermicro SSE-G2252, User Manual

Page: 937 / 1401

Chapter 26: Interface Commands
– 948 –
Eth 1/ 1 GE Up OK (0) OK (0) NS NS 2014-05-08 12:12:50
Console#
show cable-
diagnostics
This command shows the results of a cable diagnostics test.
S
YNTAX
show cable-diagnostics interface [ interface ]
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-48)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
•
The results include common cable failures, as well as the status and
approximate distance to a fault, or the approximate cable length if no
fault is found.
•
To ensure more accurate measurement of the length to a fault, first
disable power-saving mode on the link partner before running cable
diagnostics.
•
For link-down ports, the reported distance to a fault is accurate to
/- 2 meters. For link-up ports, the accuracy is +/- 10 meters.
E
XAMPLE
Console#show cable-diagnostics interface ethernet 1/23
TF: Test failed
OK: OK
ON: Open
ST: Short
IE: Impedance error
NC: No cable
NT: Not tested
NS: Not supported
UN: Unknown
Port Type Link Status Pair A (meters) Pair B (meters) Last Updated
-------- ---- ----------- ---------------- ---------------- -----------------
Eth 1/23 GE Up OK (21) OK (21) 2009-11-13 09:44:19
Console#
Power Savings
power-save
This command enables power savings mode on the specified port.