Supermicro SSE-G2252, User Manual

Page: 167 / 1401

Chapter 6: VLAN Configuration
Protocol VLANs
– 171 –
•
If the frame is untagged and the protocol type matches, the frame
is forwarded to the appropriate VLAN.
•
If the frame is untagged but the protocol type does not match, the
frame is forwarded to the default VLAN for this interface.
P
ARAMETERS
These parameters are displayed:
•
Interface – Displays a list of ports or trunks.
•
Port – Port Identifier. (Range: 1-52)
•
Trunk – Trunk Identifier. (Range: 1-16)
•
Protocol Group ID – Protocol Group ID assigned to the Protocol VLAN
Group. (Range: 1-2147483647)
•
VLAN ID – VLAN to which matching protocol traffic is forwarded.
(Range: 1-4094)
•
Priority – The priority assigned to untagged ingress traffic.
(Range: 0-7, where 7 is the highest priority; Default: 0)
W
EB
I
NTERFACE
To map a protocol group to a VLAN for a port or trunk:
1.
Click VLAN, Protocol.
2.
Select Configure Interface from the Step list.
3.
Select Add from the Action list.
4.
Select a port or trunk.
5.
Enter the identifier for a protocol group.
6.
Enter the corresponding VLAN to which the protocol traffic will be
forwarded.
7.
Set the priority to assign to untagged ingress frames.
8.
Click Apply.