Supermicro SSE-G2252, User Manual

Page: 1365 / 1401

Chapter 46: IP Routing Commands
Global Routing Configuration
– 1380 –
E
XAMPLE
Console#show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
C 127.0.0.0/8 is directly connected, lo
C 192.168.1.0/24 is directly connected, VLAN1
Console#
show ip route
database
This command displays entries in the Routing Information Base (RIB).
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
The RIB contains all available routes learned through dynamic routing
protocols, directly attached networks, and any additionally configured
routes such as static routes. The RIB contains the set of all available routes
from which optimal entries are selected for use by the Forwarding
Information Base (see Command Usage under the show ip route
command).
E
XAMPLE
Console#show ip route database
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
> - selected route, * - FIB route, p - stale info
C *> 127.0.0.0/8 is directly connected, lo0
C *> 192.168.1.0/24 is directly connected, VLAN1
Console#
show ip route
summary
This command displays summary information for the routing table.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
In the following example, the numeric identifier following the named
routing table (that is, the Forwarding Information Base) is the FIB ID.
Console#show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4