Supermicro SSE-G2252, User Manual

Page: 710 / 1401

Chapter 20: System Management Commands
Switch Clustering
– 718 –
S
YNTAX
cluster member mac-address mac-address id member-id
no cluster member id member-id
mac-address - The MAC address of the Candidate switch.
member-id - The ID number to assign to the Member switch.
(Range: 1-36)
D
EFAULT
S
ETTING
No Members
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
•
The maximum number of cluster Members is 36.
•
The maximum number of cluster Candidates is 100.
E
XAMPLE
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5
Console(config)#
rcommand
This command provides access to a cluster Member CLI for configuration.
S
YNTAX
rcommand id member-id
member-id - The ID number of the Member switch.
(Range: 1-36)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
•
This command only operates through a Telnet connection to the
Commander switch. Managing cluster Members using the local console
CLI on the Commander is not supported.
•
There is no need to enter the username and password for access to the
Member switch CLI.
E
XAMPLE
Console#rcommand id 1
CLI session with the SSE-G2252 is opened.
To end the CLI session, enter [Exit].
Vty-0#