Subaru 2006 Legacy, Manual

Page: 4037 / 4302

PS-33
Steering Gearbox
POWER ASSISTED SYSTEM (POWER STEERING)
13) Using a press, push the outer race of bearing
and press-fit the pinion & valve assembly into hous-
ing.
14) Apply the specified grease to dust cover.
15) Install the dust cover on valve assembly.
CAUTION:
Be sure to install the dust cover to groove of
shaft.
16) Apply the genuine grease to the pinion gear
and bearing of valve assembly.
17) Install new O-ring to valve assembly.
18) Insert the valve assembly into place while fac-
ing the rack teeth toward pinion.
19) Tighten the bolts alternately to secure the valve
assembly.
Tightening torque:
20 N·m (2.0 kgf-m, 14.8 ft-lb)
CAUTION:
Be sure to alternately tighten the bolts.
20) Apply liquid gasket to 1/3 or more of entire pe-
rimeter of adjusting screw thread.
Liquid gasket:
THREE BOND 1102 or equivalent
(1) Pinion & valve ASSY
(2) Bearing
(3) Housing
(1) Dust cover
(2) Groove
PS-00533
(1)
(2)
(3)
PS-00534
(1)
(2)
PS-00165
(1) O-ring
PS-00535
(1)
PS-00143
bp06usen601.fm 33 ページ ２０１０年５月２７日 木曜日 午後 時３２分