Subaru 2006 Legacy, Manual

Page: 3994 / 4302

FS-2
General Description
FRONT SUSPENSION
1. General Description
A: SPECIFICATION
*1
: 2.5 GT spec. B model
*2
: OUTBACK model
–3 — 0 mm (–0.12 — 0 in) Toe angle (sum of both wheels): –0°15
′
— 0°
*3
: Except for OUTBACK model
0
±
3 mm (0
±
0.12 in) Toe angle (sum of both wheels): 0°
±
0°15
′
NOTE:
• Front and rear toe-in and front camber can be
adjusted. Adjust if the toe-in or camber tolerance
exceeds specifications.
• Other items indicated in the specifications table
cannot be adjusted. If other items exceed specifica-
tions, check suspension parts and connections for
deformation, and replace with new parts as re-
quired.
Model
Sedan Wagon
2.5 i 2.5 GT OUTBACK 2.5 i 2.5 GT OUTBACK
Front
Wheel arch height
381 (15.0) 439 (17.3) 381 (15.0) 439 (17.3)
(Tolerance:
+12 mm
–24 mm
(
+0.47 in
–0.94 in
)) mm (in)
Camber (Tolerance:
±
0°45
′
Differences between
RH and LH: 45
′
or less)
–0°15
′
0°40
′
–0°15
′
0°40
′
Caster (Referential Value) 5°55
′
4°55
′
5°40
′
4°55
′
Steering angle (Tolerance:
±
1.5°)
Inner
wheel
37.2°, 33.8°
*1
38.0° 37.2° 38.0°
Outer
wheel
33.0°, 30.2°
*1
33.7° 33.0° 33.7°
Toe-in mm (in) 0
±
3 (0
±
0.12) Toe angle (sum of both wheels): 0°
±
0°15
′
Kingpin angle (Referential Value) 13°45
′
12°05
′
13°45
′
12°05
′
Diameter of stabilizer mm (in) 20 (0.79) 21 (0.83) 20 (0.79) 21 (0.83)
Rear
Wheel arch height
365 (14.4) 438 (17.2) 375 (14.8) 438 (17.2)
(Tolerance:
+12 mm
–24 mm
(
+0.47 in
–0.94 in
)) mm (in)
Camber (Tolerance:
±
0°45
′
Differences between
RH and LH: 45
′
or less)
–0°40
′
–0°10
′
–0°30
′
–0°10
′
Toe-in mm (in)
*3 *2 *3 *2
Thrust angle (Tolerance:
±
0°30
′
) 0°
Diameter of stabilizer mm (in) 15 (0.59) 16 (0.63) 15 (0.59) 16 (0.63) 15 (0.59)
(1) Front
A – B = Positive: Toe-in, Negative: Toe-out
α
= Individual toe angles
FS-00001
B
A
(1)
asieps_tobira.book 2 ページ ２００９年１０月２６日 月曜日 午前９時１６分