Subaru 2006 Legacy, Manual

Page: 3226 / 4302

4AT- 8 0
Parking Pawl
AUTOMATIC TRANSMISSION
30.Parking Pawl
A: REMOVAL
1) Remove the transmission assembly from vehicle
body. <Ref. to 4AT-35, REMOVAL, Automatic
Transmission Assembly.>
2) Remove the rear wheel speed sensor, and sep-
arate the extension case from transmission case.
<Ref. to 4AT-69, REMOVAL, Extension Case.>
3) Remove the reduction drive gear. <Ref. to 4AT-
78, REMOVAL, Reduction Drive Gear.>
4) Remove the parking pawl, return spring and
shaft.
B: INSTALLATION
1) Install the parking pawl, return spring and shaft.
2) Install the reduction drive gear. <Ref. to 4AT-78,
INSTALLATION, Reduction Drive Gear.>
3) Install the rear vehicle speed sensor and exten-
sion case. <Ref. to 4AT-69, INSTALLATION, Ex-
tension Case.>
4) Install the transmission assembly to the vehicle.
<Ref. to 4AT-38, INSTALLATION, Automatic
Transmission Assembly.>
C: INSPECTION
Check the tab of the parking pole on the reduction
gear for wear or other damage.
(A) Return spring
(B) Parking pawl
(A) Return spring
(B) Parking pawl
AT-02214
(B) (A)
AT-02214
(B) (A)
asieps_tobira.book 80 ページ ２００９年１０月２６日 月曜日 午前９時１６分