Subaru 2006 Legacy, Manual

Page: 2277 / 4302

ME(H4DOTC)-65
Cylinder Block
MECHANICAL
20.Cylinder Block
A: REMOVAL
NOTE:
Before conducting this procedure, drain the engine
oil completely.
1) Remove the intake manifold.
<Ref. to FU(H4DOTC)-11, REMOVAL, Intake Man-
ifold.>
2) Remove the V-belts. <Ref. to ME(H4DOTC)-36,
REMOVAL, V-belt.>
3) Remove the crank pulley.
<Ref. to ME(H4DOTC)-39, REMOVAL, Crank Pulley.>
4) Remove the timing belt cover.
<Ref. to ME(H4DOTC)-41, REMOVAL, Timing Belt
Cover.>
5) Remove the timing belt.
<Ref. to ME(H4DOTC)-42, REMOVAL, Timing Belt.>
6) Remove the cam sprocket.
<Ref. to ME(H4DOTC)-50, REMOVAL, Cam
Sprocket.>
7) Remove the crank sprocket.
<Ref. to ME(H4DOTC)-51, REMOVAL, Crank
Sprocket.>
8) Remove the generator and A/C compressor with
their brackets.
9) Remove the cylinder head.
<Ref. to ME(H4DOTC)-57, REMOVAL, Cylinder Head.>
10) Remove the clutch disc and cover. <Ref. to CL-
10, REMOVAL, Clutch Disc and Cover.>
11) Remove the flywheel. (MT model)
<Ref. to CL-13, REMOVAL, Flywheel.>
12) Remove the drive plate. (AT model) <Ref. to
5AT-64, REMOVAL, Drive Plate.>
13) Remove the oil separator cover.
14) Remove the water by-pass pipe for heater.
15) Remove the water pump.
16) Remove the oil filter. <Ref. to LU(H4DOTC)-24,
REMOVAL, Engine Oil Filter.>
17) Remove the oil cooler.
18) Remove the bolts which install oil pump onto
cylinder block.
19) Remove the oil pump from cylinder block using
a flat tip screwdriver.
CAUTION:
Be careful not to scratch the mating surface of
cylinder block and oil pump.
20) Removal of oil pan:
(1) Face the #2 and #4 cylinder side upward.
(2) Remove the bolts which secure oil pan to
cylinder block.
(A) O-ring
(B) Oil cooler
(C) Oil cooler connector
ME-00723
T2
(C)
(B)
(A)
T1
ME-00138
asieps_tobira.book 65 ページ ２００９年１０月２６日 月曜日 午前９時１６分